Preparing cell or tissue lysates for ELISA Kits
Cell or tissue lysates for use with RayBio® ELISA kits can be prepared using most conventional methods, e.g. homogenization of cell or tissue in RayBio® Lysis Buffer. You may also use your own lysis buffer, such as RIPA or other formulations optimized for immunoprecipitation.
Please note the following guidelines on lysis buffer composition:
- Avoid using >0.1% SDS or other strongly denaturing detergents. In general, non-ionic detergents such as Triton X-100 or NP-40 are best, although zwitterionic detergents such as CHAPS, or mild ionic detergents such as sodium deoxycholate will work.
- Use no more than 2% v/v total detergent
- Avoid the use of sodium azide
- Avoid using >10 mM reducing agents, such as dithiothreitol or mercaptoethanols
We strongly recommend adding a protease inhibitor cocktail to the lysis buffer prior to homogenization. Most general biochemical supply companies including Roche, Sigma-Aldrich, Pierce, and...
Choices of the method for lysis and homogenization include glass-bead “smash,” douncing, freeze-thaw, sonication and crushing frozen tissue with a mortar and pestle, or even a combination of these. There is no best method for all sample types; your choice of method should be made following a brief search of the literature to see how samples similar to yours have been prepared in previous investigations.
After homogenization, centrifuge the lysates to remove cell/tissue debris (5 min @ 10,000 x g or 10 min @ 5,000 x g) and save the supernatant. Unless testing fresh, lysates should be frozen as soon as possible and stored at -20°C (or -80°C, if possible). Centrifuge them again before incubating with any immunoassay. Next, determine the protein concentration of your lysates using a total protein assay not inhibited by detergents (such as the Bicinchoninic acid (BCA) assay) and normalize the volume of each sample used to deliver the same amount of total protein for each assay.
Note: The Bradford assay is not recommended as it can be inhibited by the presence of detergents.
Since different cells and tissues may contain different amounts of protein, as starting point, we suggest using 500 µL of lysis buffer per 1×106 cells or 10 mg tissue. You may have to adjust this based upon your results. Your target total protein concentration of the homogenate should be at least 1,000 µg/mL, but 2,000 µg/mL or more would be better.
Regardless of the sample type you have, it is strongly recommended that you sub-aliquot all samples after preparation to minimize protein degradation from multiple freeze-thaw cycles. This also ensures availability of sample for further experiments.
For more information about ELISA Kits and sample preparation, visit www.raybiotech.com.